NeuroTrac MyoPlus 4 EMG ETS STIM VAT Free

Neurotrac MyoPlus 4 Specifications

1. Neurotrac MyoPlus 4 EMG Specifications:

" Dual Channel EMG

" EMG Range: 0.2 - 2000 µV RMS

" Sensitivity: 0.1 µV RMS

" Accuracy: 4% of µV reading +/- 0.3 µV at 200 Hz

" Selectable Bandpass filter - 3db Bandwidth,

b) Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% -Reading below 235 microvolts

10 Hz +/- 3 Hz to 370 Hz +/- 10% - Reading above 235 microvolts

b) Narrow: 100 Hz +/- 5% to 370 Hz +/- 10%

" Notch Filter: 50 Hz (Canada 60 Hz) - 33 dbs (0.1% accuracy)

" Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz

" Battery: 6 V Ni-MH Rechargeable Model AR110-2300

Charger: Model ARBC-110; Input: 12V DC, 1.0A; Output: 6.0V DC, 0.7A

" Work/Rest periods: 2 - 99 seconds

" Number of Trials: 1 - 99

2. Neurotrac MyoPlus 4 STIM (Neuromuscular Stimulation) Specifications:

" 4 Channel Stimulator

" Amplitude: 0-90 mA into 500 Ohm load-actual mA will tend to be less than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA

" Type: Constant current, maximum output voltage 70 Volts + 5 / - 10 Volts

" Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current

" Pulse width selection: 50 - 450 µS (2% accuracy)

" Pulse rate selection: 2 - 100 Hz (2% accuracy)

" Work / Rest periods: 2 - 99 seconds

" Time 1 - 99 minutes

" Ramp up time: 0.1 - 9 seconds

" Preset and user programmable treatment Programs

" Automatic output shut off with detection of open electrode above 0.5 mA

3. Neurotrac MyoPlus Other Specifications:

" Low battery indication at 5 .2 volts +/- 0.2 volts

" Automatic shut off 4 minutes after pressing last key

" Environmental Conditions for use: + 10 to + 30 degress Centigrade with 0 - 90% Humidity.

" Dimensions: 150 mm long, 96 mm wide, 36 mm depth

" Weight: MyoPlus4 device 0.16 kg without battery / NiMH Alkaline battery: circa 0.2 kg

Neurotrac MyoPlus4 EMG Triggered STIM is a registered Medical Device with 2 years warranty.

Neurotrac Myo Plus4 summary overview:

" Dual channel EMG (Biofeedback) combined with 4 channels of NMS - STIM

" (Neuromuscular Stimulation) & ETS (EMG Triggered Stimulation).

" Passive and Active phases: EMG and NMS in one programme

" Manual and Automatic threshold control.

" EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).

" Stand alone device or used in conjunction with established multilingual software.

" Pre-set Clinical modes for: Continence, Sports, Rehab.

" Custom programmes enabling up to 5 phases (any of: STIM W/R

" -MOD-CONT-ALT, EMG, ETS) to be set up in each programme.

" Multilingual LCD screen and voice prompts for Biofeedback.

" For home users: Produces and prints (with the optional PC Software) the comprehensive patient progress reports on a day to day basis, providing average readings (2 channels) on work/rest, peak, onset and muscle release times, work and rest deviations and the average mA current.

" Used as a learning tool for both patient and clinician with emphasis on improving treatment techniques in the use of EMG and Neuromuscular stimulation.

" Multilingual LCD screen prompts.

" High capacity rechargeable battery and charger supplied (No mains power required).

" Lock function in Plus 4 enables to lock a selected programme and record all the EMG, ETS and STIM statistics during the day.

" After downloading the data from Myoplus 4 to NeuroTrac Software, Daily Progress Report of the Patient's Home Compliance is available to review or print out.

" Patient Database.

" Visualisation of ETS training.

" Select the Patient from the database, start a Clinical session or review the previous sessions.

" 2 channels of EMG.