Beurer HA 80 Hearing Amplifiers

Beurer HA 80 Digital Hearing Amplifiers Pair Rechargeable

Beurer HA 80 are digital hearing amplifiers intended to help people with limited hearing hear better, louder and clearer.

Beurer HA 80 Hearing Amplifiers are RIC devices – ‘Receiver In Canal’ - that work by amplifying indoor and outdoor sounds and then transmitting the amplified sounds directly into the ear canals. RIC hearing amplifiers enhance indoor and outdoor sounds by preventing loss of sound during transmission, making the users of the hearing amplifiers to hear the sounds better. RIC amplifiers are a subtype of BTE (Behind The Ear) hearing amplifiers with speakers inside the ear canal for clear high quality sounds. 

Beurer HA 80 Hearing Amplifiers are supplied as a pair (i.e. set of 2 hearing amplifiers) that fit ergonomically and discreetly behind the ears.  

Beurer HA 80 Hearing Amplifiers are rechargeable and powered by exchangeable batteries.  Charging is easy due to the storage box with charging function. Simply connect the storage box to the mains power socket with the supplied micro-USB cable. Green flashing light on the storage box indicates charging and the permanent static green light indicates full charge has been achieved. It takes circa 2 hours to fully charge the amplifiers and the batteries.   

Please note that the Beurer HA 80 Hearing Amplifiers cannot treat or prevent hearing loss.   You must consult your doctor, if you have a serious or progressively worsening hearing problem or experience a sudden significant reduction in hearing. It is recommended that your hearing is checked by a doctor or a hearing specialist prior to using hearing amplifiers. The settings of the hearing amplifiers must only be adjusted by a trained hearing expert (i.e. ENT doctor or nurse or an audiologist, etc.).      

Beurer HA 80 Hearing Amplifiers summary

• Designed for people with limited hearing
• Supplied as a pair of rechargeable hearing amplifiers – one amplifier per ear
• RIC (i.e. Receiver-In-Canal) design for better and clearer hearing of sounds indoors and outdoors 
• Discreet, small and ergonomically and barely noticeable behind the ears when worn
• Compact design with hearing amplifier speaker placed directly into the ear canal 
• Perfect acoustic transmission of all sounds indoor and outdoor
• Volume adjustable up/down to desired level enabling clear hearing of all types of sounds
• Two selectable hearing programmes (modes) for quiet and loud environments: Normal Mode for quiet environments (i.e. at home or in the office) & Noise Reduction Mode for crowded or outside areas (i.e. on the move, shopping at supermarkets, in restaurants, when visiting amusement parks, etc.)  
• Low-noise rendering
• Supplied with 4 ear plugs attachments in different sizes and types per ear for best fit into the ear canals
• Storage box with charging function
• Dimensions: 30 x 35 x 41 mm
• Affordable and cost-effective                            
• Medical Device (CE1639)
• 3 years warranty

Using Beurer HA 80 Hearing Amplifiers (Pair)

Beurer HA 80 hearing amplifiers are supplied in a charging storage box with an easy to understand illustrated user instructions. Prior to first use ensure that you are familiar with the contents of the instructions prior to first use. It is essential that you follow recommendations listed in the instructions to achieve the best outcomes from the use of the hearing amplifiers.

When reading the user instructions, it is important to consider ‘warnings and safety notes’ section that recommends hearing check up by a qualified medical professional, such as an ENT doctor or an audiologist, who will also perform any necessary adjustments of your hearing amplifiers depending on the findings of your hearing examination.      

Other points of note:

1. Beurer HA 80 must not be used, when you are suffering from existing or previous ear problems, unless its use is agreed or recommended by a qualified medical professional.
2. Beurer HA 80 is an RIC hearing device (‘Receiver-In-Canal’), which means that its receiver speakers are placed directly inside of the ear canals, hence it is important not to use the HA 80 hearing amplifiers, if you have an infection in the ear or if there are signs of inflammation in the ear, discharge of rashes present.
3. It is important to remember that the Beurer HA 80 Hearing Amplifiers are single user devices, which means that you must never share your hearing aids with another person to prevent the danger of cross-contamination and in the interest of hygiene and health.      
4. Beurer HA 80 Hearing Amplifiers are not suitable for small children under the age of 36 months. Other older children must be examined by appropriately qualified hearing specialist before a hearing aid is chosen.  
5. All warnings, safety points and precautions are listed in the user instructions, so be sure to consult the instructions prior to first use and for continual reference thereafter.  
6. Prior to first use it is essential to ensure that the hearing amplifiers and the batteries are charged. To charge them, connect the storage box with charging function with inserted hearing amplifiers and interchangeable Li-Ion batteries to the mains power, using the micro-USB cable. Flashing green light indicates that the amplifiers and the batteries are being charged. When charging is complete, the green light becomes permanently static. It takes circa 2 hours to fully charge the amplifiers and the batteries.   
7. You should always store your hearing amplifiers in the storage box after they have been fully charged. Simple charging instructions are presented in the user instructions, so please ensure that you follow them.     
8. Set the initial volume to the lowest setting before using/operating the hearing amplifiers.
9. The sound hearing tubes are printed/identified with 2B in red or blue. The red is for right ear and the blue is for left ear.
10. Attach the earplugs to the sound tubes.
11. Place the hearing amplifier case behind your ears.
12. Hold one sound tube and carefully position the earplug in the ear canal. If the earplug does not fit tightly and comfortably, try a different earplug.
13. Place the fixing tube (i.e. the curved part of the sound hearing tube) along the outside of your ear to ensure that earplug fits tightly and securely in the ear. If the fixing tube causes you discomfort or bothers you, you can remove it at the point where it connects to the speaker.
14. You must never insert the sound tube into the ear canal without an earplug!  
15. To switch the hearing amplifiers on or off, just hold down the program selection button on the device for 3 seconds - as illustrated in user instructions.  
16. Use volume control to adjust the sound volume to desired / appropriate level, so that you can hear the sounds clearly and distinctly.
17. Beurer HA 80 Hearing Amplifiers have 2 selectable programs/modes: P1 is for quiet indoors environments (i.e. home or office) and P2 is a noise reduction program for use on the move and in noisy environments, such as supermarkets or restaurants. You can easily change the hearing program by pressing the program selection button.     
18. Once the batteries in the hearing amplifiers run out of charge, you can easily replace them with the fully charged spare batteries. Simply slide off discharged battery from the hearing amplifier and slide on fully charged battery.
19. Dry moisture and sweat from your amplifiers after each use by placing the drying capsule into the special slot inside the storage box – see user instructions. When the drying capacity of the capsule diminishes, its colour changes from bright orange to whitish, indicating that it must be replaced with a new capsule.         
20. Please ensure that you clean your hearing amplifiers routinely. It is an easy and simple process that is clearly described in user instructions. Earwax guards prevent earwax causing damage to the hearing amplifiers or completely blocking the passage of sounds. User instructions include advice on earwax guards and when to change them.     
21. Always refer to illustrated user instructions to ensure correct operation of the Beurer HA 80. Retain the user instructions for your future reference.        

Beurer HA 80 Hearing Amplifiers technical specifications

• Sound amplification: 43 dB ± 5dB (maximum 48 dB)
• Maximum sound pressure level (OSPL90): 118 dB ± 3dB (maximum 121 dB)
• Overall harmonic distortion: ≤3% @ 1600 Hz
• Input noise: ± 35 dB
• Voltage: 1.5 V
• Power supply: ≤3 mA
• Operation period: ≥ 26 hours
• Storage box with charging function
• Frequency range: 200 – 6700 Hz
• Input noise: ≤ 35 dB
• Voltage: 1.5 V
• Dimensions: 30 x 35 x 41 mm
• Operating conditions: Temperature: - 10° C to + 40° C; RH: 30 % ~ 75 %; Atmospheric pressure: 700 ~ 1600 hPa
• Storage and transport conditions: Temperature: - 10° C to + 55° C; RH: 10 % ~ 90 %; Atmospheric pressure: 500 ~ 1600 hPa
• Serial number is located on the device

Beurer HA 80 Hearing Amplifiers – advanced hearing amplifiers for clear sounds indoors and outdoors!  

Back to top